Item6AAGuidanceAppendix1DesignPlacemaking
AGENDA ITEM 6
APPENDIX I
CAIRNGORMS NATIONAL PARK AUTHORITY Planning Committee Item 6 Appendix I 25/03/2022
PLANNING Cairngorms National Park Local Development Plan 2021 Non-statutory guidance: Policy 3 – Design and Placemaking
Contents
How to Use this Guidance 1 Introduction and context 1 Who is the guidance for 3 Key Design and Placemaking Considerations 3 The right development in the right place 3 Development Plan policy and allocations 3 Replacing or converting existing building stock 4
DESIGN 5 The Design Process 6 SITE APPRAISAL 7 Site and Area Appraisal to inform design 7 Appraisal: Wider, Local & Site 8 Wider Landscape Appraisal 9 Views / Visual Amenity 9 Landscape character 9 Land form 9 Natural heritage 9 Other landscape designations 10 Conservation Areas, Listed buildings and other cultural heritage including archaeology 10 Historic Layouts 11 Water Environment 11 Local Area Appraisal 12 Amenities and employment opportunities 12 Active travel network and sustainable transport options 12 Access and Roads 12 Site Considerations 13 Utilities Infrastructure 13 Waste Collection 13 Cycle Storage 13 E‑Charging points 13 DETAILED SITE ANALYSIS 14 DESIGN CONCEPT 15 Context 15 Brief 15 DESIGN 16 Siting the Design 16 Siting Integration 17 Site Layout 19 Views 20 Scale and Massing 21 Access and Parking 21
Boundaries 22 Speyside Way: Easy to move around and beyond 44 Infill Development 23 Timber merchant’s showroom and office: All Aspects 45 DESIGN STATEMENT 24 Dellmohr Affordable Housing: All Aspects 46 Design Statement: Content 24 Sustainable Drainage Systems (SuDS): All Aspects 47 Design Solution 24 PLANNING APPLICATION 25 Submitting a proposal 25 Community Engagement 25 PLACEMAKING 26 The Six Qualities of Successful Places 27 Distinctive 28 Place Character within or adjacent to Cairngorms Towns and Villages 29 Safe and Pleasant 33 Welcoming 35 Welcoming: Nethy Bridge Affordable Housing 36 Adaptable 37 Inclusive Places 38 Adaptability: Am Fasgadh 39 Resource Efficient 40 Renewable Energy 41 Community hydro-scheme: Resource Efficient 42 Easy to Move Around and Beyond 43
How to Use this Guidance This non-statutory guidance supports delivery of the Cairngorms National Park Local Development Plan 2020 and applies to all planning applications within the Cairngorms National Park. The Local Development Plan is available via https://cairngorms.co.uk/planning- development/ldp-2021/ and should be read alongside this guidance.
This guidance should be used during the preparation and assessment of planning applications to ensure that the requirements of Policy 3: Design and Placemaking are met.
Introduction and context Policy 3 of the Local Development Plan applies to all development. It provides guidance to inform design and placemaking for development proposals within the Cairngorms National Park.
Local Development Plan 2021 Policy 3- Design and Placemaking 3.1 Placemaking All developments must meet the six qualities of successful places, which in accordance with Scottish Planning Policy paragraphs 41 to 46, are to be:
i. distinctive; ii. safe and pleasant; iii. welcoming; iv. adaptable; v. resource efficient; and vi. easy to move around and beyond.
3.2 Major developments Major developments of 50 or more homes, or 2 hectares or more of employment, retail or mixed use development, will need to be supported by a masterplan or development brief. Where a site is allocated, this requirement will be outlined in the Community Information section of the Plan. Masterplans and development briefs must demonstrate how the development meets the six qualities of successful places.
CAIRNGORMS NATIONAL PARK AUTHORITY Planning Committee Item 6 Appendix I 25/03/2022 3.3 Sustainable Design All development proposals must also be designed to: a) minimise the effects of the development on climate change in terms of siting and construction and, once complete, achieve at least the minimum standard in compliance with the Building Standards Technical Handbook;
b) be sympathetic to the traditional pattern and character of the surrounding area, local vernacular and local distinctiveness, whilst encouraging innovation in design and use of materials;
c) use materials and landscaping that will complement the setting of development;
d) make sustainable use of resources, including the minimisation of energy, waste and water usage, within the future maintenance arrangements, and
for any decommissioning which may be necessary;
e) enable the storage, segregation and collection of recyclable materials and make provision for composting;
f) promote sustainable transport methods and active travel, including making provision for the storage of bicycles and reducing the need to travel;
g) improve or add to existing public and amenity open space;
h) maintain and maximise all opportunities for responsible outdoor access, including links into the existing path network and ensuring consistency with the Cairngorms National Park Core Paths Plan
i) protect the amenity enjoyed by neighbours including minimisation of disturbance caused by access to the development site;
j) include an appropriate means of access, egress, levels of private amenity ground, and space for off-street parking; and
k) create opportunities for further biodiversity and promote ecological interest.
3.4 Replacing existing building stock Replacing existing building stock will be considered favourably where:
a) the existing building is not a listed building or an unlisted building that makes a positive contribution to the character of a conservation area; and
b) the original footprint of the building is incorporated into the new development unless an alternative adjacent site would minimise any negative environmental, landscape or social effects of the development.
3.5 Converting existing building stock Converting existing building stock will be considered favourably where:
a) the building is redundant for its original use, and is unlikely to have a commercial or economic future in its current form; and
b) the conversion works maintain the style and character of the original building in terms of form, scale, materials and detailing, where they contribute positively to the context and setting of the area.
3.6 Alterations to existing building stock Alterations to existing building stock will be considered favourably where they:
a) respect the design, massing, proportions and general visual appearance of the building and area; and
b) maintain an appropriate level of private ground, including space for off- street parking.
Who is the guidance for This document has been produced to inform those who engage with the planning process such as developers, architects, agents, planning officers and anyone preparing a planning application as well as other interested parties.
Key Design and Placemaking Considerations The right development in the right place National Planning Policy stresses the importance of delivering the right development in the right place. For example residential development on brownfield sites within settlements is likely to be compatible with surrounding land use and also more inclined to be supported. The first hurdle in the process will be to locate a suitable site. Care must be taken to carefully consider the suitability of the potential site to ensure problems don’t arise during the design phase, which may ultimately make the scheme financially unviable and unlikely to obtain planning permission. Important questions to consider at an early stage in the design process include: • Will your proposed development be compatible with nearby land uses? • Will this development at this location be resource efficient? • Will the development create sustainable economic opportunities for example in utilising local produce or sustainable tourism, or by providing houses near places of work? • Are important infrastructure connections available? (poor infrastructure connections often compromise the liveability of a place and providing the required infrastructure can add substantially to costs. Site consideration should include availability of infrastructure including water, sewerage, energy, sustainable transport, vehicular access, broadband and access for construction traffic).
Development Plan policy and allocations All planning applications will be assessed against the adopted Local Development Plan and supporting supplementary and non-statutory guidance. For sites within or near settlements consideration should be given to the specific settlement guidance in the Local Development Plan. Any Community Action Plans or Local Place Plans for the area should also be consulted.
Natural heritage and landscape considerations are important to the special qualities of the area and in the statutory aims of the National Park these factors are likely to have greater significance for development within the Park than outside and there are specific policies and guidance relating to these factors. Relevant information and guidance is provided in the Cairngorms National Park Local Development Plan and associated supplementary guidance, which
can be found on the Planning pages of the Park Authority website: https://cairngorms.co.uk/planning- development/ldp-2021/
Early engagement with planners is encouraged to avoid unexpected costs, delays or issues during the planning application process. Initial contact should be with the Planning Authority in which the development would be located, e.g. Highland, Moray, Angus, Aberdeenshire or Perth and Kinross Council.
Replacing or converting existing building stock Where possible, materials should be reused in the replacement building, being recycled where this is not possible to support the circular economy.
Proposals are encouraged that enable a higher proportion of secondary aggregate/recycled materials to substitute for the consumption of primary aggregates, including facilities for storing, processing and recycling construction, demolition and excavation materials (Policy 10.6: Minerals).
DESIGN
The Design Process
VISION of a sustainable development in line with the Aims of the National Park
SITE APPRAISAL wider, local and site based analysis
DIALOGUE with planners & stakeholders. Pre-application recommeneded.
Considering:
Engagement with local residents Development Briefs Masterplans Site constraints EIA and other statutory requirements
DETAILED SITE ANALYSIS identifying constraints and opportunities
DESIGN CONCEPT
DESIGN utilising skills from Planning, Architecture, Conservations, Hydrology, Ecology, Landscape and Engineering professionals
DESIGN STATEMENT
PLANNING APPLICATION BRIEF
PLACEMAKING PRINCIPLES*
- page 27
SITE APPRAISAL Thorough wider, local and site based analysis is key to developing a proposal that responds to the sites unique characteristics.
A good site appraisal will identify, amongst other things, how the landform, built (both historic and more contemporary) environment and ecology of the site and surrounding area presents constraints and opportunities, the connection options for services, what infrastructure is likely to be required, how the development could connect to existing paths, roads and public transport.
A key question to consider is whether the proposed development will have adverse effects on the Special Landscape Qualities (SLQ’s) of the Park. The Cairngorms National Park was designated as such because of its outstanding special landscape qualities and the sensitive ecosystems that exist there.
The National Park’s communities each have their own character and qualities and these contribute to the overall special landscape qualities of the overall Park.
High quality development can contribute to making the Park an attractive place for local people, visitors and investors.
Site and Area Appraisal to inform design
Appraisal and design are integral to each other. Site appraisal should be an early stage of any development proposal and should inform any pre-application discussions.
Appraisal needs to be aware of the bigger picture but also be comprehensive enough so that problematic constraints are not discovered late in the design and development process.
Appraisal can be conceptualised as having three stages relating to the different scales within which the development will be situated: • Wider landscape context. • The local area (character / environment.) • The specific site itself (site analysis). The factors that should typically be assessed are outlined on the next page however the unique characteristics of the site and the development proposal will dictate any particular areas of focus. The development appraisal will form part of the design statement submitted as part of any planning application.
The diagram overleaf shows the appraisal needed at the different scales followed by more detailed explanations of key considerations at each stage on pages 8 to 13.
Appraisal: Wider, Local & Site Wider Landscape Context Backdrops/Skylines Topography & Landform Setting Qualities Views In Visual Setting Landscape Character Land Use ↓ Woodland / Farmland Views Out Local Viewpoint Landscape Experiance Local Area Appraisal Development Pattern Site Considerations Retain Existing Features Trees Field Boundaries Tree lined edge of town Knoll Materials & Details Views In Boundary Treatments Views Out Sympathetic design of external spaces Placement of ancillary building & infrastructure What is the most appropriate scale, layout and type to fit the wider area?
Have you considered landscape capacity or cumulative issues?
Would the development relate well to the skyline, backdrop and landforms?
What existing natural and/or built features provide a sense of place?
What natural and built features might add quality to people’s experience of the proposed development?
(Diagrams and text (derived from) material supplied by Loch Lomond National Park. How would the development integrate into the local area visually and functionally? Have you considered: • Connections to nearby destinations and existing routes • Landuse • • Approaches and a sense of welcome • Roofs and skylines • The overall scale and composition How will the development integrate in terms of boundary treatments, watercourses, open space, access, landscape features and key views? What are the assets that can be utilised to add distinctiveness and quality to the development? How will the development relate in terms of details, materials, spaces, landscaping (soft and hard), drainage, biodiversity, green infrastructure, access points and opportunities taken to further biodiversity and promote ecological interest?
What site considerations need to be considered?
Have adverse effects on natural and cultural heritage constraints been avoided through careful siting and design?
Site Appraisal should inform a more detailed site analysis.
Wider Landscape Context Views / Visual Amenity What are the important views from the site and towards the site, particularly from local viewpoints or well-used places? Landscape character What are the landscape setting, features and topography within which the development will be situated?
Are there any specific landscape or scenic designations that apply? Land form Look at the topography of the land for the site and surrounding area. How could your development be sited to utilise shelter from prevailing wind, enable passive solar gain and appreciate any views without being visually disruptive in a way that negatively affects the area? Policy 5 of the Cairngorms National Park Local Development Plan and the supporting Landscape non-statutory guidance provide more detail about on what needs to be considered and how to assess the landscape interest of a site and surrounding area. Both should be read alongside this guidance and are available via https://cairngorms.co.uk/planning- development/ldp-2021/ Natural heritage In line with the statutory aims of the National park, natural heritage features are a key part of any development appraisal and proposals should, create opportunities for further biodiversity and promote ecological interest. Measures should respond to the existing habitats and species found on site and in the surrounding area, rather than being identikit measures that are repeated at every development. Examples of simple measures that could be incorporated into the design of development where appropriate to the site include (but at not limited to): designing and planting SUDs ponds and blue-green infrastructure to create diverse habitats as well as attractive features for people; connecting green spaces in the development with those surrounding the development, to allow wildlife to move through the development; including areas of amenity space that are less managed, such as wildflower areas, to provide insects and other wildlife with an undisturbed place to live as well as attractive feature for people; retaining existing trees and mosaic of vegetation rather than creating a grassed monoculture; native tree planting to complement and enhance existing areas of woodland; providing bird and bat boxes in species appropriate locations; using hedges as boundary treatments to soften, or as an alternative to, fences or walls.
Development appraisal should assess natural heritage features in and near the site, including; • mature trees or woodland in or near the site (particularly ancient/semi-ancient woodland), • green network features in or near the site, • natural heritage designations such as SSSIS, SACS, SPAs etc,
• the possible presence of protected species, and • areas within or near the site that have or could have a particular abundance of flora and fauna.
Policy 4 of the Cairngorms National Park Local Development Plan and the supporting Natural Heritage non-statutory guidance provide further information on what needs to be considered when assessing the ecological interest of a site. Both should be read alongside this guidance and are available at: https://cairngorms.co.uk/planning- development/ldp-2021/
Other landscape designations Development should be informed by any additional designations; for example development within a dark sky park is likely to require lighting provision that does not create extensive ‘light pollution’. Policy 5 Landscape and supporting non-statutory guidance provides more information on landscape related requirements.
Conservation Areas, Listed buildings and other cultural heritage including archaeology Consideration should be given to cultural heritage interests in the vicinity of the proposed development. Some interests, such as listed buildings and conservation areas, require specific consideration to comply with the legislation that designates and protects them.
The Fife Arms Hotel, category B listed building in Braemar Policy 9 of the Cairngorms National Park Local Development Plan and Cultural Heritage non-statutory guidance provide further information on different cultural heritage interests in the National Park and what needs to be considered. Both should be read alongside this guidance and are available at: https://cairngorms.co.uk/planning- development/ldp-2021/
Historic Layouts The historic street patterns and rhythm contribute to the sense of place, along with older landmark buildings reflecting the cultural heritage of the settlement, such as railway stations, churches, civic buildings and hotels.
Such historic buildings may be listed or form part of a conservation area. Their setting and views of them should be respected.
Water Environment It is important to take into consideration any existing water features, such as watercourses, ponds, field drainage, pipes, sewers and water table information.
Existing vegetation can be an indicator of how wet the ground is and areas of the site that may be prone to flooding.
Given the increased incidence of extreme rainfall events, flooding is of increasing significance. SEPA flood maps may give some indication of risk however professional assessment may be advisable and a Flood Risk Assessment or Drainage Impact Assessment may be required.
Local Development Plan Policy 10: Resources and its supporting non- statutory guidance provides further information on the requirements regarding water resources, flooding and dealing with foul drainage.
Local Area Appraisal Amenities and employment opportunities What local amenities and services are in the vicinity of the proposed development, and what capacity do they have for the potential increase in people associated with the proposed development? Will new facilities be required? Policy II of the Cairngorms National Park Local Development Plan and Developer Obligations guidance provide further information on what needs to be considered. They should be read alongside this guidance and are available at https://cairngorms.co.uk/planning- development/ldp-2021/
Are there local employment opportunities that would reduce the need for commuting or could economic / employment initiatives and spaces be included as part of the development? Active travel network and sustainable transport options Are there cycle paths, core path or active travel links in the vicinity that could provide a healthy and pleasant options to arrive at popular destinations? Larger developments in particular should consider how they can include and connect to the active travel and public transport networks. Information on core paths can be found via https://cairngorms.co.uk/working- together/authority/national-park- strategies/core-paths-plan/ Access and Roads Designers need to consider how the proposed development will link to the existing road network (if necessary). Separate restrictions generally apply to the use of private access tracks but all connections to a public road need to be acceptable in terms of visibility splays to ensure safe access and egress.
New junctions on to the trunk road network require approval from Transport Scotland and will only be considered if they are designed in accordance with the Design Manual for Roads & Bridges (DMRB) and where there would be no adverse impact on road safety or operational performance.
Image Left: Grantown-On-Spey: Signposting located in central areas near public transport
Site Considerations Utilities Infrastructure Utilities connections need to be considered from the outset of the siting and design process, as they can incur substantial costs, create constraints to the layout as well as be influenced by other constraints such as topography, ground conditions and ecology. Off-grid solutions require research and detailed consideration to identify the most appropriate options for the site. Waste Collection New development should include appropriate space for bins to store waste and recyclable materials, as well as providing suitable access for their collection. Where structures are required to store bins, the design and materials of the structures should reflect other buildings on site. Cycle Storage Appropriate space should also be available for covered and secure cycle storage. It should be located in areas of natural surveillance and provide safe access to routes in and out of the development. E‑Charging points Given the need to enable the switch away from vehicles powered by fossil fuels, the provision of charging points for electric vehicles should also be included in the design and layout of proposed developments. Where practical, this should be linked to onsite renewable electricity generation and storage to reduce demands on the national grid.
DETAILED SITE ANALYSIS To inform a measured and appropriate design to the chosen site it is important to carry out a site analysis. This will vary from site to site but the main features will remain constant and will present opportunities and barriers for the design of the building. Every site will be unique and may contain existing mature trees, waterways, differing topography, existing habitats and site specific ecology and weather patterns. The final design will need to respond to these elements as well as the existing built (both historic and more contemporary) environment and the natural heritage in the area.
- Site Boundary
- Sunpath
- Existing Trees
- Prevailing Winds
- Access Road
- Summer Equinox Sunset
- Views from Site
- Contours
- Noise from Traffic
- Existing Building
- Views into Site
Protected species will need to considered, mature trees may need to be retained and the design will have to adapt to accommodate them. Prevailing winds will provide the opportunity for natural ventilation but also need to be considered when designing sheltered outdoor spaces.
As mentioned, good design starts with an appreciation of all the important aspects of a site and the surrounding areas. These can then be considered together to deliver development that makes the best use of site and area assets plus the synergies between them. As part of the design and placemaking process, early and ongoing engagement with Planners in the Planning Authority in which the proposed development would be located (e.g. Aberdeenshire, Angus, Moray, Highland or Perth and Kinross Council) is strongly recommended to ensure relevant considerations are included from the outset and avoid costly delays later on in the planning and development process.
Example site analysis drawing
DESIGN CONCEPT The Site Analysis, Context and Brief should inform the design concept put forward for the development. Addressing the opportunities and constraints identified in the site analysis, while responding to the contextual analysis findings and adhering to the brief a suitable design concept will emerge.
This will help readers of the Design Statement understand how the proposed development has minimised adverse effects and optimised opportunities to deliver enhancements.
National Park Local Development Plan policies. Brief A short brief should be included to outline the project type, delivery and objectives. This is the opportunity to explain why the development is being proposed and what need its creation is going to meet. It should also highlight key constraints that will be overcome by the design solution. This will not be a lengthy piece of text, it should be short and concise.
Context A comprehensive analysis of the context in which the proposed development would be located should consider the landscape character and form, built, cultural and natural heritage of both the development site and surrounding area. Failing to respond in a sensitive manner is likely to lead to the proposal failing to meet the requirements of Cairngorms
DESIGN Siting the Design When selecting your site there are many considerations you need to take into account to ensure its suitability and the probability of obtaining planning permission.
This section will explore site considerations, but is not intended to be a fully inclusive guide covering every scenario, as this would be impractical. Instead it is intended to act as a guide to best practice and highlight ‘best avoided’ scenarios that will be unlikely to be appropriate.
The first hurdle in the process will be to locate a suitable site. Care must be taken to carefully consider the suitability of the potential site to ensure problems don’t arise during the design phase, which may ultimately make the scheme financially unviable and/or unlikely to obtain planning permission. Key Considerations • Location and connectivity with areas protected for nature conservation, of archaeological importance or affecting the built (both historic and more contemporary) environment. • Whether the site is suitable for development in relation to ground conditions and the amount of earth works that may be required, the sensitivity of the existing habitats and species that use the site. • Is there a flood risk and if so, can this be mitigated. • Does the proposed development; a) provide a sheltered area, taking into consideration prevailing winds, b) avoid creating issues for existing development around the site, such as overlooking or blocking daylight, c) take into consideration shading from existing vegetation, • Does the site already have planning permission for what you want to build? If not, you will have to apply for new planning permission. If there is planning permission for what you want to build, what are the planning conditions for that permission? • Is the site suitable in terms of size relative to the proposed design, d) provide good views out of the property to take advantage of the natural assets, e) include existing trees and shrubs that can be retained to enhance the eventual landscaping of the site, f) have an established or suitable location for access, including space for the necessary visibility splays, g) have provision for the connection to mains utilities such as water, electricity and broadband.
• building regulations and other requirements? Large buildings with additional outbuildings will need more space. • In addition to considering the ratio of building(s) to plot size, other considerations such as foul water treatment may need to be considered if the site is in a remote location (i.e. the requirement for a septic tank and/or percolation filter beds). Siting Integration In the Cairngorms National Park the landscape is made up of hills, mountains and valleys and as a consequence, sites with sloping gradients will inevitably be put forward in housing and other development proposals.
Integrating the development into the landscape and lanform should be an early consideration in the design process. Buildings traditionally situated on a slope will be sited with the short axis permedicular to the gradient and this method will be most effective when: • the building is well integrated with the surrounding landscape form,
• ensure building heights remain appropriate to the setting, surrounding structures and features, and • ensure landscaping and structural planting around new buildings integrates them with the natural environment, using native plant species appropriate to the location.
Best practice for designing on sloping sites will be to; • avoid excessive landscaping that will look out of place in the landscape, including the need for high retaining walls,
< 6m
6m < 6m • when placing buildings in parallel with the contours ensure the depth does • ensure the depth of the building does not exceed 6m and vehicle access and parking is kept to a minimum, and not exceed 6m minimising the need for excessive excavation of the hillside,
• avoid buildings sited on the top of a hill as it will potentially negatively impact on the natural skyline.
A potential option for siting and designing buildings on slopes is to use the natural gradient within the internal layout, as shown in the drawing below. Buildings that ‘step down’ with the natural gradient perpendicular to the contours are likely to have reduced landscape and visual effects.
The siting and design of developments should respect and respond to their immediate and surrounding landscape and habitats. For example, in valleys, flat or open spaces, low and small scale developments are likely to have less effects on visual amenity. Large bulky buildings are unlikely to be appropriate in such locations. However, larger buildings may be more easily accommodated if seen in the context of landscape features of a similar scale, for example mature trees or a hillside.
All proposals should seek to integrate with the natural landforms and features of the site. Where changes to the landform or removal of natural features (such as trees) is considered necessary to accommodate proposed development, a landscaping plan should be included with the application. The plan should demonstrate how such changes have firstly been minimised through careful siting and design, and secondly mitigated through ground profiling and appropriate planting of plant species native to the surrounding area.
A large building or buildings seen in isolation that do not integrate with the landscape are unlikely to be appropriate.
Siting and design also needs to consider other issues, such as drainage and flood risk. Buildings situated in hollows can face challenges with drainage and can be at risk of flooding from surface water.
Where there is a potential risk of flooding according to SEPA’s flood risk mapping, a flood risk assessment in line with SEPA guidance should be submitted with the planning application. It must identify the level of risk and how the risk has been mitigated through careful siting and design. However development is unlikely to be appropriate in locations at high risk of flooding.
It may be necessary for a development to incorporate soak away drainage, for example an underground gravel pit to allow rain water from roof gutters and driveways to drain away into the ground,
or where connection to mains sewerage is not possible and waste water treatment system need to discharge cleaned water into the ground.
The location of soakaways should be informed by percolation tests, to ensure the ground provides sufficient drainage. Care should be taken with their siting to ensure that tree roots are protected during creation, and excessive ground excavations are avoided so that effects on surface vegetation and natural landform are minimised, and to avoid areas proposed for amenity becoming water logged and unusable. Site Layout Once the site has been selected the next consideration will be placing the building(s) in the best location on the site to take advantage of the natural assets, environmental considerations and protecting visual amenity.
The illustrations are generic examples demonstrating the benefits of good site layout, they are not an exhaustive list rather intended to prompt best practice by considering the scenarios.
When considering the site layout with regard to existing trees it is important to consider the sun path implications of shading on the proposed building location. Situating the building too close to existing trees will affect the amount of natural light available for internal spaces.
The building will also cause additional shading on the site and reduce the usability of the adjacent spaces.
It is important to consider the effects of shading to maximise solar gain and the availability of natural light in both the building and the adjacent spaces.
Placing the building on the northern side of the site will increase the quality of the usable outdoor space and maximise the potential for natural light and solar gain in the building, avoiding the effect of the existing trees.
Parking, garages and access can also be placed on the northern edge as this area will not be used as external recreation space and therefore will not suffer from a lack of natural light.
Positioning the buildings away from trees will also have ecological benefits; protecting their roots and increasing their lifespan and growth potential.
Additionally by placing the building appropriately on the site will increase the potential for future extensions to meet changing needs of the occupants that will also be able to benefit from natural light.
Similar considerations should be taken into account in relation to prevailing winds on the site to optimise the potential for natural ventilation to inform the building design. Views When positioning the building on the site early consideration should be given to the potential views from the property to avoid overlooking neighbouring buildings and their private amenity space.
Siting and design should avoid overlooking of private space, such as living spaces and rear gardens, and other adverse effects (such as noise, disturbance and lighting) on the amenity of neighbours.
← To avoid this scenario, new buildings should be positioned to ensure minimum overlooking of private space. This could be done by taking advantage of the natural landform to position new buildings at a lower elevation than existing buildings. Another solution could be to use a layout that has frontages facing away from the Planning applications are less likely to receive objections from neighbouring properties when adverse effects on their amenity have been avoided through sympathetic siting and design. private space of existing buildings.
Scale and Massing All buildings need to be in keeping with the surrounding built environment, landform and natural features. This includes being of an appropriate scale. Cramming as many buildings as possible into a site or squeezing an oversized building into a small plot leaving little amenity space is unlikely to be appropriate.
Very large buildings should be sited on plots appropriate to their scale. Landscaping should respond to the site and surrounding area in terms of landform, natural features, trees and other vegetation.
Massing should also be considered; large bulky buildings that stand out on the horizon or break the natural skyline are unlikely to be appropriate due to adverse landscape and visual effects. Smaller buildings that do not stand out or break the skyline are more likely to be appropriate. Access and Parking Development that is centred and designed around existing road layouts all too often does not consider the visual impact of highly visible uniform parking immediately in front of the building.
This creates an environment visually dominated by the use and presence of motor vehicles, reducing opportunities to create safe, welcoming and visually appealing places. It is also not in keeping with national and National Park aims to promote sustainable travel through use of active travel and public transport over the private car.
Instead,