Item5Appendix1BPlans
CAIRNGORMS NATIONAL PARK AUTHORITY Planning Committee Agenda Item 5 Appendix IB 27/05/2022
AGENDA ITEM 5
APPENDIX IB
2022/0046/DET
PLANS
N 0 5 10 (metres) Existing Footpath Proposed Boundary Ascent Trail 02 Existing hard standing area Existing hill track Existing ski tow structure Proposed Boundary Descent Trail 05 Existing hill track 25 Proposed Boundary Descent Trail 04 New trail to run adjacent to existing hill track Proposed Boundary Ascent Trail 03 Funicular Mid-Station PROPOSED BOUNDARY AREAS TRAIL NAME LENGTH AREA ASCENT TRAIL 03
- 250m Length
- 0.04 Ha Trail Sections and Make Up For sections and details of trail construction refer to drawing 006. The trails in this area will be constructed using the ‘Typical trail construction detail’.
Project CAIRNGORM MOUNTAIN Drawing Title CAIRNGORM TRAIL DESIGN UPPER ZONE TRAIL LAYOUT Job No CR20158 Drawn By Scale Issue Date TC 1:500-A1 1:1000-A3 16.11.21 Revision Approved By A Drawing No 005 CRC TRAILS
Cross fall adjusted to suit flow for riders and ensure path surface drains Path edges stabilised using stripped turf reclaimed from path tray 25mm dust (or suitable ‘as dug’ fines) compacted surface 200mm Minimum depth compacted sub-base material Turf lined top side ditch where necessary this will run to twin wall pipe which will pass under the trail formation to allow surface water to drain away on the downhill side. ABF Suitable formation (or larger graded base aggregate) FALL Typical Trail Construction Detail Existing ground level Cross fall adjusted to suit flow for riders and ensure path surface drains Path edges stabilised using stripped turf reclaimed from path tray 25mm dust (or suitable ‘as dug’ fines) compacted surface 300mm Minimum depth compacted sub-base material Geogrid (terram or sim.) on to poor subsoil FALL Turf lined top side ditch where necessary this will run to twin wall pipe which will pass under the trail formation to allow surface water to drain away on the downhill side. Existing ground level Path edges stabilised using stripped turf reclaimed from path tray Existing ground level Turf lined ditch Geotextile terram (or sim.) Floated Trail Construction Detail FALL Geotextile Geogrid شند بشر Conveyor Belt Uplift FALL 200mm compacted surface (type 1 or sim.) material 300mm Minimum depth compacted larger aggregate sub-base material Turf lined ditch Conveyor Belt Track Construction Detail 25mm dust (or suitable ‘as dug’ fines) compacted surface 200mm Minimum depth compacted sub-base material Cross fall adjusted to suit flow for riders and ensure path surface drains FALL Path edges stabilised using stripped turf reclaimed from path tray — max 45 degree batter Existing ground level Turf lined top side ditch where necessary this will run to twin wall pipe which will pass under the trail formation to allow surface water to drain away on the downhill side. Suitable formation (or larger graded base aggregate) Typical ‘Berm’ Trail Construction Detail Trail Sections and Make Up The ‘Descent’ type trails will have more of an active raised profile across the hill side. The berm detail shows the changing profile of the trail.
Project CAIRNGORM MOUNTAIN Drawing Title CAIRNGORM BIKE TRAILS TRAIL SECTION DETAILS Job No CR20158 Drawn By Scale Issue Date TC 16.11.21 1:2000-A1 1:4000-A3 Revision Approved By A Drawing No 006 CRC TRAILS
conveyor belt 93 m 93.39m conveyor belt 96 m Diese Unterlagen sind Eigentum der Firma Bruckschlögl GesmbH, 4822 Bad Goisern und dürfen als Ganzes oder teilweise weder vervielfältigt noch Drittpersonen zugänglich gemacht werden ohne die schriftliche Zustimmung der Eigentümer. Zuwiderhandlungen verpflichten zu Schadenersatz. / These documents remain the sole property of Bruckschlögl GesmbH, 4822 Bad Goisern and must not be copied or reproduced in whole or in part or made available to third parties without written permission from the owners. Violation obligates compensation for damages. Projekt/project: Hersteller/Manufacturer: MASCHINENBAU-FÖRDERTECHNIK-SEILBAHNTECHNIK Cairngorm Mountain Limited BRUCKSCHLÖGL GesmbH Scotland Draft 2 erstellt durch: created by: Produkt/product: Baureihe/Model range SUNKID ZAUBERTEPPICH SKD 26 Datum/Date SUNKID CONVEYOR BELT 13.10.2021 Details/details: Maßstab/Scale Band 750 mm breit 1:500 STAR LIFTS BELT 30” WIDE A‑4822 Bad Goisern Hallstätte Sumkid HZ Format: A3 Ansprechpartner LPa Representatives: Au Projektionsmethode 1 EDV Nr.: pr19-10 – 142_r2 5456 – 2 Seiten/Pages 2/2 EDV Nr.: pr19.
DETAIL- W (ADJUSTMENT LEG) TYPE- G BELT SURFACE — B 216 mm‑8,5 Band/BELT 250 mm — 10,0” Band/BELT DETAIL- X ANCHOR (BY CUSTOMER) (M 1⁄25) F Ø100mm — 4” Ø20mm 3÷4” Spindel ADJUSTMENT LEG GRAVEL SURFACE A 150x150mm OPTION: CONCRETE PLATE 500x500x40mm OPTION: WOOD PLATE 350x350x50mm OPTION: SHEET METAL PLATE 1200x200x3mm 300x200x3mm XXXXXXXXXXXX WEIGHT: STRUCTURE: 1000 N/m PASSENGER: 1000N/m (theo. maximum) TOTAL 2000 N/m LOAD PER PAIR OF LEGS: 6000 N PER LEG: 3000 N Entrance height 0,79m ~5m flat entry area streetsnow TERRAIN DIG OFF FILL UP drainage (by customer) +0,25m ‑0,1m H(eight): ANCHOR FORCES SEE PROJECT Tensioning is undertaken with 2 chains or 2 ropes Minimum Breaking load: 4x F ENTRANCE ENTRANCE GRADE 12,25% ‑0,05m ‑0,01m ‑0,04 4m Seite: EDV Nr.: pr19-10 – 142_r2 page: 1⁄2 ‑0,08m Seite: Seite: page: 2/2 page: 1⁄2 SUNKID CONVEYOR BELT LENGTH: AVERAGE GRADE: ‑0,01m 92,83m +0,14m 93 m 16,65% MAX GRADE 21,3% +0,33m +0,78m +0,9m² +1,02m +0,81m +0,64m EXIT DETAIL‑X DRIVE STATION 5% ~4m flat exit area Exit height 0,55m MP 2m snow +0,41m drainage (by customer) +0,23m 3m 1,93m 3,88m snowpit SUNKID (2x3x2m) Diese Unterlagen sind Eigentum der Firma Bruckschlögl GesmbH, 4822 Bad Goisern und dürfen als Ganzes oder teilweise weder vervielfältigt noch Drittpersonen zugänglich gemacht werden ohne die schriftliche Zustimmung der Eigentümer. Zuwiderhandlungen verpflichten zu Schadenersatz. / These documents remain the sole property of Bruckschlögl GesmbH, 4822 Bad Goisern and must not be copied or reproduced in whole or in part or made available to third parties without written permission from the owners. Violation obligates compensation for damages. Projekt/project: Hersteller/Manufacturer: Cairngorm Mountain Limited BRUCKSCHLÖGL Scotland TERRAIN IN ACCORDANCE TO DRAWING: “Lower Car park Piste.dwg” Length: 93 m DRAWING VALID FOR 0,7 m/s erstellt durch: Ansprechpartner: created by: LPa Representatives: MASCHINENBAU-FÖRDERTECHNIK-SEILBAHNTECHNIK A‑4822 Bad Goisern am Hallstätter Au 132 Sumkid HZ Format: A3 Produkt/product: Baureihe/Model range SUNKID ZAUBERTEPPICH SKD 26 Datum/Date SUNKID CONVEYOR BELT 13.10.2021 Details/details: Maßstab/Scale Band 750mm breit 1:150 STAR LIFTS BELT 30” WIDE ISO 5456 – 2 Projektionsmethode 1 EDV Nr.: pr19-10 – 142_12 Seiten/Pages 2/2 3m 2m
DETAIL- W (ADJUSTMENT LEG) TYPE- G BELT SURFACE — B 216 mm — 8,5 Band/BELT 250 mm 10,0” Band/BELT DETAIL- X ANCHOR (BY CUSTOMER) (M 1⁄25) FØ100mm‑4” Ø20mm 3÷4” Spindel ADJUSTMENT LEG GRAVEL SURFACE A 150x150mm OPTION: CONCRETE PLATE 500x500x40mm OPTION: WOOD PLATE 350x350x50mm OPTION: SHEET METAL PLATE 1200x200x3mm 300x200x3mm WEIGHT: XXXXXXXXXXXX H(eight): ANCHOR FORCES SEE PROJECT Tensioning is undertaken with 2 chains or 2 ropes Minimum Breaking load: 4x F STRUCTURE: 1000 N/m PASSENGER: 1000N/m (theo. maximum) TOTAL 2000 N/m LOAD PER PAIR OF LEGS: 6000 N PER LEG: 3000 N Entrance height 0,82m ~5m flat entry area TERRAIN DIG OFF FILL UP drainage (by customer) ‑0,14m ENTRANCE ENTRANCE GRADE 12,4% ‑0,25m ‑0,32m +0,11m Seite: EDV Nr.: pr19-10 – 142_r2 page: 1⁄2 Seite: Seite: page: 2/2 page: 1⁄2 SUNKID CONVEYOR BELT LENGTH: AVERAGE GRADE: +0,37m> ‑0,06m +0,15m 95,87m +0,07m ‑0,28m 96 m 15% MAX GRADE 17% ‑0,53m ‑0,7m ‑0,1m DRIVE STATION 5% EXIT DETAIL‑X Entrance height 0,86m ~5m flat entry area MP 2m +0,7m> +0,25m 3m 1,7m snowpit SUNKID 3,66m (2x3x2m) drainage (by customer) 3m 2m Diese Unterlagen sind Eigentum der Firma Bruckschlögl GesmbH, 4822 Bad Goisern und dürfen als Ganzes oder teilweise weder vervielfältigt noch Drittpersonen zugänglich gemacht werden ohne die schriftliche Zustimmung der Eigentümer. Zuwiderhandlungen verpflichten zu Schadenersatz. / These documents remain the sole property of Bruckschlögl GesmbH, 4822 Bad Goisern and must not be copied or reproduced in whole or in part or made available to third parties without written permission from the owners. Violation obligates compensation for damages. Projekt/project: Produkt/product: Hersteller/Manufacturer: Cairngorm Mountain Limited BRUCKSCHLÖGL Scotland TERRAIN IN ACCORDANCE TO DRAWING: “Lower Car park Piste.dwg” Length: 96 m DRAWING VALID FOR 0,7 m/s erstellt durch: created by: LPa Ansprechpartner: Representatives: MASCHINENBAU-FÖRDERTECHNIK-SEILBAHNTECHNIK A‑4822 Bad Goisern am Hallstätter Sumkid HZ Format: A3 Au 132 STAR LIFTS SUNKID ZAUBERTEPPICH Baureihe/Model range SKD 26 Datum/Date SUNKID CONVEYOR BELT 13.10.2021 Details/details: Maßstab/Scale 1:175 Band 750mm breit BELT 30” WIDE Projektionsmethode 1 EDV Nr.: pr19-10 – 142_12 Seiten/Pages 2/2